CSE30 and CSE36 Series Sorters

Performance

For large caps and difficult sorting applications. For quotes with feed rate requirements, sample caps must be provided.

Structural

Formed stainless steel hopper and column with square stainless tubing for legs.

Mechanical

  • Belt is 30 in (762 mm) width grey polypropylene
  • Hopper - 30 ft³ (.84 m³); approximately 45 in (1143mm) from floor to lip of hopper
  • Discharge height - 90 in (2286 mm) standard
  • Flights - CNC Machine PVC Standard. Stainless steel, conductive UHMW, or Delrin as required to achieve rates or to satisfy customer requirements
  • Parts are discharged using medium pressure air from a regenerative blower; compressed air is not required

Electrical

  • Power is 480 VAC 3 phase w/24VDC control circuit
  • Belt motor is 480 VAC 3 phase with a variable frequency drive
  • Start/stop switch and speed dial control
  • "Track Full" sensor allows unit to be run independent of the machine it feeds
  • Door switches shut down machine in the event unwanted material enters hopper
  • NEMA 12 gray powder coated enamel enclosure

Options

  • Increased discharge height in increments of 12 in (305 mm) to a maximum of 114 in (2896 mm)
  • NEMA 4X (304 stainless steel) electrical enclosure
  • 3/8 in (9.5 mm) Lexan hopper cover
  • Belt cover and column top cover


Downloads
PDF Spec Sheet
2D CAD Footprint Drawing (AutoCad .dwg R2000)
Image of ECONO Sorter

Picture of a CSE30 Sorter